The water temperature and saponification solution content of the water tank-type wire drawing machine

The temperature of the cooling water in the sealing chamber of the water tank-type wire drawing machine is too high, exceeding 40 degrees during use. As a result, the sealing chamber cannot provide the required cooling effect on the metal wire, which can cause the single wire to remain at a high temperature after annealing and oxidize when exposed to oxygen in the air at high temperatures during operation.
The saponification content of the cooling liquid in the sealing chamber of the water tank drawing machine is insufficient, which will increase the friction between the metal wire and each guide wheel, thereby causing the temperature of the metal wire to rise again, resulting in surface oxidation of the metal wire. The water pressure and volume of the cooling water in the sealed chamber are insufficient, which prevents the metal wire from achieving a satisfactory cooling effect.
Regularly check whether the cooling circulating water equipment of the water tank drawing machine is operating normally and whether the cooling effect is normal; Add substances that can increase the concentration of saponification solution to the sealed chamber after a certain period, which can change the content of saponification solution in the cooling water and ensure that the metal wire can operate normally on the guide wheel; Regularly check whether the water pressure of the circulating water is normal, and constantly adjust the pressure and amount of cooling water entering the sealed chamber according to changes in water pressure during production.
The high-efficiency and energy-saving electromagnetic induction heating device utilizes the principle of electromagnetic induction to convert electrical energy into thermal energy. Through balanced heating, the screw is less prone to bending and deformation, which not only saves maintenance costs but also improves product quality due to uniform heating. According to statistics, the sales price of products produced after the transformation of high-efficiency and energy-saving electromagnetic induction heating devices can be increased by 100 to 300 yuan per ton.
Under the same conditions, equipment such as wire drawing machines can save more than 60% electricity compared to using resistance wire heating methods. This heating device can quickly heat up to over 600 degrees Celsius through intelligent control, eliminating the need for workers to work in environments where coal and coke are smoked and roasted at high temperatures. Now this high-efficiency and energy-saving electromagnetic induction heating device has been applied to wire drawing machine equipment, which is energy-saving, emission-reducing, economical, and environmentally friendly, and should be popularized.